All information will be kept personal and confidential and will not be sold or shared with any other businesses. Thank you, Meyer Global Filters.
ASK YOUR FILTER QUESTION
YOU MUST CLICK SUBMIT FOR YOUR REQUEST TO BE PROCESSED.
Type your filter questions in the box below, and we will email or call you with answers to all your filter questions!
FOR ANSWERS TO THESE OR ANY OTHER FILTER QUESTIONS PLEASE CONTACT US OR FILL IN ASK YOUR QUESTION HERE:
This page was last updated: December 1, 2017
Camfil Farr is the world leader in air filtration systems and clean air solutions, they provide the safety tools to achieve sustainability, maintain high air quality, and reduce hospital-acquired infections -- all while lowering total cost of ownership.
a. Normally you are unable to see a micron until it's between 30-40 microns. Most of the fine dust particulates that cause problems are between 2-4 microns. To be effective against 2-4 microns, you would need a fine fiber filter.
6. How can I be a LEED building?
a. Most new buildings are set up to be LEED accredited.
For your air filtration, you need a MERV13 filter rating to be LEED accredited.
7. How should I install my pleated filter?
a. Filters should be installed vertically. This will prevent pleats from sagging, makes them last longer, and keep the frame stronger.
8. What is a beverage board frame?
a. A beverage board frame is a water resistant frame to help prevent collapsing in your system. An example of a filter with a beverage board frame is a 30/30 5 Star green air filter.
9. Why are my prefilters dirty on both sides?
a. This is caused by using a course fiber filter where the fibers have bigger spaces between them letting fine dust seep through both sides.
10. Why would I use carbon filters?
a. Carbon Filters are used for odor control. Regular filters are particulate filters, carbon filters are gas phase filters.
Direct From our New Local Warehouse,
AVAILABLE FOR IN STOCK FILTERS ONLY
WE WELCOME MADELYN AND MICHELLE AS A TERRIFIC NEW ADDITION TO THE MEYER GLOBAL FILTERS TEAM.
THEY HAVE BEEN OUT IN THE FIELD WORKING DILIGENTLY GETTING TO KNOW ALL OF OUR LOYAL CUSTOMERS AND PASSING OUT THEIR 2013-14 GREEN AWARDS.
TOP 10 FAQ:
1. What is the difference between fine fiber, and coarse fiber media?
a. Fine filters are able to stop the fine dust particulates that course fibers can not stop from seeping through,affecting not only your coils but also the people breathing in your facility.
2. What does pressure drop mean?
a. All product sheets have the starting pressure drop of a clean filter. You will need to know this to understand your magnehelic gage when changing out your filters.
3. How can filters save on energy?
a. The lower the pressure drop the more energy you can save with your final filters. For example, A Durafil ES MERV 14 has a starting pressure drop of a .31, compared to a Riga Flo MERV 14 with a starting pressure point of .68.
4. What is a MERV rating?
a. It determines the efficiency of the filter, for example, MERV 8 = 40% efficiency, MERV 11 = 60%, MERV 13 = 80%, MERV 14 = 90-95%. Also micron removal.